Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Convenient compact design of this RF wireless remote control switch system - includes 2 transmitter & 1 receiver. It is very distinguished and the high quality. This switch can be applied to your lights, air conditioners, televisions, fans, doors, power locks, electric windows, electric curtains, etc. ... all DC 0-28V or AC110 ~ 240V electrical appliances! The remote control is really fashionable and practical. It should be a good choice for you.
Package Include:
1 x Receiver: S1U-AC-ANT3 2 x Transmitter: C-1 / C-2 1 x User manual
Feature:
Application: It can be used in industry automation, agriculture
automation and home automation, such as factory, house, farm, pasture,
vehicle, ship, offshore operation, aerial vehicle, field call, etc. It
can remote control equipments on land, water and air, such as remote
control lights, sirens, locks, motors, fans, winches, blinds, linear
actuators, doors, windows, electric solenoid valves, security alarm,
business signs and various devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector,
it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), widely used in
US, Canada... and voltage of AC220V (200V~240V), used in UK, France...
Relay Output: This receiver is dry relay output, it can be used to
operate both DC and AC equipments. The output terminals are NO / NC
(normally open / normally closed), which serves as a switch. That means
you should also connect a separate power supply to equipments.
Each channel can work at maximum current 10A.
With wired control terminals: You can connect sensors, limit switches,
manual switches or external devices to control the receiver.
With external telescopic antenna, the receiver have a farther working
range.
You can control the equipments by using the receiver with transmitter
(remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With characteristics of reverse power protection and over current
protection.
Reliable control: The code has thousands of different combinations, and
the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers
simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S1U-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22~12AWG
Working Frequency: 433.92MHz
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Static Current: ≤6mA
Maximum Load Current: 10A / each channel
Operating Temperature: -20 ° C to +70 ° C
PCB size: 88mm x 80mm x 18mm
Case size: 115mm x 90mm x 55mm
Transmitter Parameters:
Model No.: 0021000 (C-1) / 0021001 (C-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the
button). Slide down the button will appear.
Channel/Button: 1 (C-1) / 2 (C-2)
Button Symbol: No symbol (C-1) / 1, 2 (C-2)
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433Mhz
Encoding Chip: PT2262/ PT2264/ SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes.
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Matching Transmitters:
The receiver can work with different transmitters, such as model C-1 / C-2
(100M), CWB-1 / CWB-2 (50M, waterproof) and CB-1 / CB-2 (1000M) etc.
When you set the receiver in Self-locking or Momentary mode, it should work with
single button transmitter, such as model C-1 (100M), CWB-1 (50M, waterproof), or
CB-1 (1000M) etc. When you set the receiver in Interlocking mode, it should work
with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M, waterproof),
or CB-2 (1000M) etc.
Working Range:
With a transmitter (such as C-1) to form a complete set, the maximum working
distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an
open ground, no barriers, no any interference. But in the practice, it will be
hindered by trees, walls or other constructions, and will be interfered by other
wireless signals. Therefore, the actual distance may not reach this maximum
working distance.
If you want to have a further working range, you can use a powerful transmitter,
such as CB-1 or CB-2 transmitter.
Usage (with the transmitter C-1 or C-2):
The receiver can be used to control both DC 0~28V and AC 110~240V equipments.
Notice: The receiver is relay output, not DC/AC power output. Initial state of
relay output terminals: Terminals B and C are Normally Open; Terminals A and B
are Normally Closed.
Wiring:
1) If you want to control a DC 12V lamp, do as following:
1.1 Connect the live wire of AC power supply to terminal “L / +” of INPUT, and
connect the neutral wire of AC power supply to terminal “N / −” of INPUT.
1.2 Connect terminal C to the positive pole of DC power supply, connect terminal
B to the positive pole of DC lamp, and connect the negative pole of DC lamp to
the negative pole of DC power supply.
2) If you want to control an AC 220V lamp, do as following:
2.1 Connect the live wire of AC power supply to terminal “L / +” of INPUT, and
connect the neutral wire of AC power supply to terminal “N / −” of INPUT.
2.2 Connect terminal C to the live wire of AC power supply, connect terminal B
to one side of AC lamp, and connect another side of AC lamp to the neutral wire
of AC power supply.
Setting different control modes:
We have set the receiver as Self-locking control mode before delivery. If you
want to use other control modes, do as following operation:
1) Setting Self-locking mode: Only connect Jumper-2.
Mode Self-locking (working with transmitter C-1): Press -> On; Press again ->
Off.
Press button of the transmitter: The relay is activated (connect the terminals B
and C, disconnect the terminals A and B), and the lamp is turned on.
Press button again: The relay is deactivated (disconnect the terminals B and C,
connect the terminals A and B), and the lamp is turned off.
2) Setting Momentary mode: Only connect Jumper-1.
Mode Momentary (working with transmitter C-1): Press and hold -> On; Release ->
Off.
Press and hold button of the transmitter: The relay is activated (connect the
terminals B and C, disconnect the terminals A and B), and the lamp is turned on.
Release button: The relay is deactivated (disconnect the terminals B and C,
connect the terminals A and B), and the lamp is turned off.
3) Setting Interlocking mode: Do not connect Jumper-1 and Jumper-2.
Mode Interlocking (working with transmitter C-2): Press a button -> On; Press
another button -> Off.
Press button 1 of the transmitter: The relay is activated (connect the terminals
B and C, disconnect the terminals A and B), and the lamp is turned on.
Press button 2 of the transmitter: The relay is deactivated (disconnect the
terminals B and C, connect the terminals A and B), and the lamp is turned off.
Manual control terminals:
The receiver has wired control terminals, and you can connect external devices,
sensors, or manual switches to the receiver's manual terminals, then use them to
trigger the receiver.
1) By low level signal:
You can connect external devices (with low level output signal) to terminals 1
(signal+) and 3 (signal−), the external device’s output signal can control the
receiver.
When the external device outputs low level signal to terminals 1 and 3, the
relay is activated (connect terminals B and C, disconnect terminals A and B),
and the lamp is turned on.
When the external device does not output signal to terminals 1 and 3, the relay
is deactivated (disconnect terminals B and C, connect terminals A and B), and
the lamp is turned off.
2) By NO/NC contact:
You can connect one manual switch to terminals 1 and 3, and then you can use
this manual switch to control the receiver.
When connect terminals 1 and 3, the relay is activated (connect terminals B and
C, disconnect terminals A and B), and the lamp is turned on.
And when disconnect terminals 1 and 3, the relay is deactivated (disconnect
terminals B and C, connect terminals A and B), and the lamp is turned off.